One set 4000000kcal coal fired thermal oil heater arrived at customer’s site finally after the long distance shipping.
This chain grate type thermal oil heater will be separate into two parts during delivery, so that it will be convenient for transportation.
After customer received the heater, we’ll provide detailed drawing and free online guiding to help customer finish the assembling, installation and commissioning.

This customer has very high requirement for quality, and thanks to customer’s trust, they choose Bidragon among all the competitors at last.
Two sets 2500000kcal gas fired thermal oil heater installed successfully in customer’s workshop, cotton industry.
Expecting our long terms cooperation.

One set 1400KW gas fired thermal oil heater finished installation last week in Algeria, chemical factory.
Customer feedback with praise to Bidragon team. Thanks to our customer’s trust again.

What is the installation process of industrial boilers?

The condensing boiler condensing combustion technology reduces the flue gas temperature to 50 degrees, condenses part of the flue gas into a liquid state, and absorbs the flue gas.

Prevent the steam generator from entering too much steam: restart when the water heater valve is set, and the steam turbine unit side should allocate funds to lock the machinery and equipment, and fasten the check door of the exhaust pipe of the high-pressure cylinder to prevent the door from closing too loosely and causing the heat treatment furnace. Too much steam.

Each new gas fired boiler room can only be set up with one chimney. The height of the chimney should be based on the total installed capacity of the boiler room, as specified in Table 4, and the chimneys of oil-fired and gas-fired boilers should not be less than 8 meters.

The design of the boiler should be reasonable. The construction and connection of the furnace, combustion chamber, and pipelines need to be guided by professional boiler technicians

Many people think that the more fuel you add to a gas boiler, the more steam you can produce. However, if too much fuel enters the furnace, the effect will be counterproductive.

Thermal oil heater and steam boilers are two common types of boilers in industrial production. In the process of purchasing, how do companies measure which boiler is more energy-efficient? Let's find out together.

vertical steam boiler is a kind of boiler commonly used by small and medium-sized enterprises. This kind of boiler has relatively small evaporation capacity, small footprint, simple operation and safe operation.

(Gas fired /oil fired) thermal oil boilers use gas, fuel oil or ethanol as fuel, and heat-conducting oil as the heat-conducting carrier. They can be used as high-temperature heat sources in various environments below 350°C.

Refineries use Water tube boiler more than Fire tube boilers.
Reboilers (Kettle type boilers) are heat exchangers typically used to provide heat to the bottom o

A Boiler is a closed vessel in which water or other suitable liquid is heated to generate steam or vapour.The steam/vapour is then exited and is used for various purposes like heating applications (water heating, central heating), boiler based power generation or even for cooking and other purposes which could be domestic or industrial.

Biomass fuel boiler is a kind of boiler that uses biomass fuel as fuel. Compared with coal-fired boilers, it has the advantages of environmental protection and cleanliness. However, biomass fuel is slightly more expensive than coal, about 891 tons. Compared with electricity, gas, gasoline and diesel, it can save 40%-60%.

In the operation of coal-fired steam boilers, temperature fluctuations will cause a series of hazards. High temperature will cause the temperature of the superheater tube wall to rise, and low temperatures will affect the consumption of natural gas by gas users and even damage the equipment.

how to choose a suitable steam heating system for your factory?

An electric steam boiler is a type of boiler where the steam is generated using electricity, rather than through the combustion of a fuel source.

Indonesia customer order 10TPH Oil/Gas Fired Steam Boiler, now has been finished production and arranged the shippment.

Skid-mounted thermal fluid heaters has been finished and shipped to Brazil. Supply heat to the chemical industry.

Our regular customer from Bangladesh order 6million KCal woodchip biomass fired thermal oil boiler, and this hot oil boiler has been finished production and will be arranged shippment. Customer will use this hot oil boiler in his compressed particle board production line.

After the hot water boiler is stopped for cooling, thoroughly remove the ash deposits on the heating surface and the ash and slag on the upper part of the grate and the lower part of the furnace body.

Heating boilers have good economic and environmental benefits for central heating. First of all, central heating can save about 30% of energy by replacing wall-hung boilers

Combustion and explosion in biomass boiler furnace: The main reason for the explosion in the furnace is that the liquid stays in the furnace all the time. When the concentration of combustibles in the gas reaches a certain level, it will explode. If the boiler is not started to purge the furnace, or operate according to regulations when igniting, it is easy to cause a furnace explosion accident.

Indonesia customer order 2TPH LPG Gas Fired Steam Boiler, has been finished production and arranged the shippment.Customer will use this boiler to provide steam